“CMTS”的版本间的差异
| 第201行： | 第201行： | ||
transport ipv6 | transport ipv6 | ||
clock source ipv6 2001:10:74:54::1 gateway ipv6 2001:60:10:13::27 | clock source ipv6 2001:10:74:54::1 gateway ipv6 2001:60:10:13::27 | ||
| + | == Boot image == | ||
| + | boot harddisk:cbrsup-universalk9.BLD_V166_THROTTLE_LATEST_20170518_032244_2.SSA.bin | ||
| + | |||
| + | CRDC-NG-E09#dir harddisk:d31_sreg_nightly.cfg | ||
2018年1月15日 (一) 07:34的版本
DEBUG
RPD can not online
sho cable depi multicast pool sho cable rpd log reverse
SSH Configuration
ip ssh V1 configure terminal enable password lab ip domain-name cisco.com crypto key generate rsa general-keys modulus 1024 ip ssh time 120 ip ssh authentication 4 line vty 0 4 transport input ssh exit aaa new-model aaa authentication login default local username admin password lab
ip ssh V2 1. enable
2. configure terminal
3. ip ssh rsa keypair-name keypair-name
4. crypto key generate rsa usage-keys label ssh_key modulus 1024
5. ip ssh [time-out seconds | authentication-retries integer]
6. ip ssh version 2
ip ssh authentication-retries 4
ip ssh source-interface GigabitEthernet0
ip ssh rsa keypair-name ssh_key
ip ssh version 2
ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
aaa new-model
aaa authentication login default local
aaa session-id common
username admin password lab line vty 0 4
exec-timeout 0 0 privilege level 15 password lab logging synchronous exec prompt timestamp transport input ssh
vCMTS
ptp
vcmts config 1.ptp config [RP_0:~]$ cat /harddisk/rommon_vars SR_INIT_SHELL=aux_do_system_shell IP_ADDRESS=3.33.11.23 IP_SUBNET_MASK=255.255.0.0 DEFAULT_GATEWAY=3.33.0.1 REAL_MGMTE_DEV= SR_MGMT_VRF=0 RPHY_IF=Gi2 CABLE_PTP_IF=eth3 CABLE_PTP_IP=3.30.222.2 CABLE_PTP_MASK=255.255.0.0 CABLE_PTP_SERVER=192.168.222.222 refer:http://cmtswiki.cisco.com:8080/display/cmtspub/PTP+setup+in+vCMTS+VM+and+server [Router:~]$ cat /harddisk/ptpd2.conf ptpengine:interface=eth3 ptpengine:domain=0 ptpengine:preset=slaveonly ptpengine:ip_mode=unicast ptpengine:unicast_negotiation=y ptpengine:unicast_destinations=192.168.222.222 ptpengine:log_delayreq_interval=0 global:dump_packets=N global:log_status=y global:status_file=/bootflash/ptpd2.status global:log_file=/bootflash/ptpd2.log global:log_file_max_size=256 ptpengine:vbr_ignore_utc_offset=y ptpengine:utc_offset=0
2.vmac config [RP_0:~]$ cat /harddisk/vmac_config_file ./vmac -nhop_mac 00:04:9F:00:09:13 -rphy_ip 3.35.1.4 -vmac_mac 00:50:56:a4:13:15 -vmac_ip 3.35.1.1 -rphy_if Gi2 --us_mac_cpus 1 --ds_mac_cpus 2 --debug 0 refer:http://cmtswiki.cisco.com:8080/display/cmtspub/vmac+related+setup 3. cable rpd 1 identifier 0004.9f00.0913 core-interface Gi2
principal rpd-ds 0 downstream-cable 0/0/0 profile 3 rpd-us 0 upstream-cable 0/0/0 profile 3
r-dti 1 rpd-event profile 0 ! ptp r-dti 1 ptp-domain 0 clock-port 1
ethernet 1 clock source ip 192.168.222.222 gateway ip 3.35.222.222 /* ip address of PTP server and ip address of RPD gateway (vhh0 in my case uses local ip address of RPD)
! 0050.5691.2540
rpd config
1.ptp config
root@00049F000913:/# cat /bootflash/ptp.conf
[PORT_ID] 0
[MASTER_IP] 192.168.222.222
[GATEWAY_IP] 3.35.222.222
R-PHY#show ptp clock 0 state apr state : PHASE_LOCK clock state : SUB_SYNC current tod : 1479943078 Wed Nov 23 23:17:58 2016 active stream : 1 ==stream 1 :
port id : 0 master ip : 192.168.222.222 stream state : PHASE_LOCK Master offset : 44 Path delay : -1671 Forward delay : -1627 Reverse delay : -1695 Freq offset : -455301 1Hz offset : 14
refer: http://cmtswiki.cisco.com:8080/display/cmtspub/PTP+config+in+RPD
ssh -l root 3.35.1.4
00:04:9F:00:09:13/3.35.1.4
en
shell
upgradeuboot.sh
tftp -r /tftpboot/RPD_ECE3-20161109_070001.itb -g 20.1.0.33
tftp -r /tftpboot/RPD_seres_rpd_20170112_010001.itb -g 3.35.11.1
tftp a0000000 3.33.11.1:/tftpboot/RPD_seres_rpd_20160912_010001.itb && bootm
tftp a0000000 3.33.11.1:/tftpboot/RPD_ECE3-20161110_070002.itb && bootm
ifconfig eth2 3.33.11.5 netmask 255.255.0.0
tftp -r tftpboot/RPD_ECE3-20161110_070002.itb -g 3.33.11.1
Check uboot version root@RPD00049f300255:/# strings -n 30 /dev/mtd5 | grep ^U-Boot U-Boot 2016.01 (Sep 23 2016 - 03:19:57 +0800) Check CPLD version root@00049F300249:/# rpdcpld -g 0 address = 0x0, value = 0x235 ns-cBR-05#sho running-config | sec ptp ptp clock ordinary domain 0
servo tracking-type R-DTI clock-port slave-from-903 slave delay-req interval -4 sync interval -5 sync one-step transport ipv4 unicast interface Lo1588 negotiation clock source 192.168.222.222
ptp r-dti 20
ptp-domain 0 clock-port 22 ethernet 1 clock source ip 192.168.222.222 gateway ip 93.2.40.93
ns-cBR-05#sho ru ns-cBR-05#sho running-config | sec prd ns-cBR-05# ns-cBR-05#sho running-config | sec rpd
virtual-arpd 1 source-id 1 nc 3.3.3.3 udp-port 100 ip 32.32.32.32 255.255.255.0
! cable rpd 1
identifier 0004.9f00.0919 no rpd-ds 0 mute no rpd-ds 0 shutdown core-interface Te1/1/0 principal rpd-ds 0 downstream-cable 1/0/0 profile 128 rpd-us 0 upstream-cable 1/0/0 profile 4 r-dti 20 rpd-event profile 0
ptp clock ordinary domain 0
servo tracking-type R-DTI clock-port slave-from-903 slave delay-req interval -4 sync interval -5 sync one-step transport ipv4 unicast interface Lo1588 negotiation clock source 33.33.158.158
ptp r-dti 1
ptp-domain 0 clock-port 22 ethernet 1 clock source ip 33.33.158.158 gateway ip 60.10.10.20 clock-port 23 ethernet 1 transport ipv6 clock source ipv6 2001:10:74:54::1 gateway ipv6 2001:60:10:13::27
Boot image
boot harddisk:cbrsup-universalk9.BLD_V166_THROTTLE_LATEST_20170518_032244_2.SSA.bin
CRDC-NG-E09#dir harddisk:d31_sreg_nightly.cfg
