CCIE

eigrp 認證

authentication mode hmac-sha-256 ccie key chain不同？

eigrp 認證 authentication mode hmac-sha-256 ccie key chain不同？ 命名基本配置address-family 什麼情況用

DMVPN R18 D 10.2.19.0/24 [90/3097600] via 123.20.1.25, 00:00:26, Tunnel0 123.20.1.25 為什麼不是123.20.1.27

水平分割的原理是 從這個端口學到的 路由條目 不再出這個端口發送出去-----防止環路 路由反射----------IBGP不許full mesh

路由策略實施後為什麼R3沒有123.0.0.0/8 le32的路由

沒理解下面的要求 all ip add used for ebgp peering must pass the bgp's directly connected check l no bgp speaker is AS 12345 may use the network or redistribute startement under any address-family of the bgp router config

ip pim sparse-mode作用是什麼

copy running-config startup-config

BGP

R11#sh ip bgp 10.2.0.0/16 BGP routing table entry for 10.2.0.0/16, version 67 Paths: (2 available, best #1, table default) Flag: 0x820

 Advertised to update-groups: (Pending Update Generation)
    2
 Refresh Epoch 1
 65001 65001, (aggregated by 65002 10.255.1.15)
   10.254.0.53 from 10.254.0.53 (10.255.1.7)
     Origin IGP, localpref 100, valid, external, atomic-aggregate, best
     rx pathid: 0, tx pathid: 0x0
 Refresh Epoch 1
 65001 65001, (aggregated by 65002 10.255.1.15)
   10.255.1.12 (metric 11) from 10.255.1.12 (10.255.1.12)
     Origin IGP, metric 0, localpref 100, valid, internal, atomic-aggregate
     rx pathid: 0, tx pathid: 0

R11#sh ip bgp 10.2.0.0/16 BGP routing table entry for 10.2.0.0/16, version 67 Paths: (2 available, best #1, table default) Flag: 0x820

 Advertised to update-groups: (Pending Update Generation)
    2
 Refresh Epoch 1
 65001 65001, (aggregated by 65002 10.255.1.15)
   10.254.0.53 from 10.254.0.53 (10.255.1.7)
     Origin IGP, localpref 100, valid, external, atomic-aggregate, best
     rx pathid: 0, tx pathid: 0x0
 Refresh Epoch 1
 65001 65001, (aggregated by 65002 10.255.1.15)
   10.255.1.12 (metric 11) from 10.255.1.12 (10.255.1.12)
     Origin IGP, metric 0, localpref 100, valid, internal, atomic-aggregate
     rx pathid: 0, tx pathid: 0

Origin IGP----------通過network宣告的 Origin Incomplete---------重分發進BGP得到的路由